|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
ALUMINUM ELECTROLYTIC CAPACITORS UR Chip Type, High CV series Chip type, higher capacitance in larger case sizes. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine using carrier tape. Adapted to the RoHS directive (2002/95/EC). WS High Temperature Reflow UG Extended range UR Higher C/V Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan WX Performance Characteristics - 40 ~ +85C 4 ~ 100V 3.3 ~ 1500F 20% at 120Hz, 20C After 1 minute's application of rated voltage, leakage current is not more than 0.03CV (A) . Measurement frequency : 120Hz, Temperature : 20C Rated voltage (V) tan (MAX.) 4 0.35 6.3 0.28 4 7 15 10 0.24 6.3 5 10 16 0.20 10 4 8 25 0.16 16 3 6 25 2 4 35 0.14 35 2 3 50 0.12 50 2 3 63 0.12 63 2 3 100 0.12 100 2 3 Measurement frequency: 120Hz Stability at Low Temperature Rated voltage (V) Z- 25C / Z+20C Impedance ratio ZT / Z20 (MAX.) Z- 40C / Z+20C Endurance After 2000 hours' application of rated voltage at 85C, capacitors meet the characteristic requirements listed at right. Capacitance change tan Leakage current Within 20% of initial value 200% or less of initial specified value Initial specified value or less Shelf Life After storing the capacitors under no load at 85C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they will meet the specified value for endurance characteristics listed above. The capacitors shall be kept on the hot plate maintained at 250C, for 30 seconds. After removing from the hot plate and restored at room temperature, they meet the characteristic requirements listed at right. Black print on the case top. Capacitance change tan Leakage current Resistance to soldering heat Marking Within 10% of initial value Initial specified value or less Initial specified value or less Chip Type (6.3, 8 x 6.2) Capacitance Lot No. D0.5 1 Trade mark B0.2 Plastic platform 0.3MAX. 2Voltage C0.2 Positive 0.5MAX. Type numbering system (Example : 10V 100F) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 UUR 1 A 1 0 1 M C L 1GS Package code A0.2 Size code Configuration Capacitance tolerance (20%) N2 100 10V Rated Capacitance (100F) Rated voltage (10V) Series name Type L0.3 H 1 Size 8 x 6.2 only 2 Voltage mark for 6.3V is 6V . In case of marking for 3 units, "V" for rated voltage is omitted. Negative DxL 6.3 x 5.8 6.3 x 7.7 8 x 6.2 8 x 10 10 x 10 E Code A0.2 CL CL CL NL NL (8 x 10, 10 x 10) Positive Lot No. Trade mark C0.2 0.5MAX. Plastic platform 0.3MAX. Capacitance 2 Voltage D0.5 B0.2 DxL (mm) 6.3 x 5.8 2.4 6.6 6.6 2.2 5.8 0.5 ~ 0.8 6.3 x 7.7 2.4 6.6 6.6 2.2 7.7 0.5 ~ 0.8 8 x 6.2 3.3 8.3 8.3 2.3 6.2 0.5 ~ 0.8 8 x 10 2.9 8.3 8.3 3.1 10 0.8 ~ 1.1 10 x 10 3.2 10.3 10.3 4.5 10 0.8 ~ 1.1 L0.5 Pressure relief vent Negative H Dimension table in next page. A0.2 A B C E L H N2 100 35V E A0.2 CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS UR Cap.( F) 3.3 4.7 10 22 33 47 100 150 220 330 470 680 1000 1500 series Dimensions V Code 3R3 4R7 100 220 330 470 101 151 221 331 471 681 102 152 6.3 x 5.8 6.3 x 7.7 8 x 10. 8 x 10. 10 x 10. 152 200 284 344 347 8 x 6.2 160 (143) 8 x 6.2 190 (188) 8 x 10. 8 x 10. 265 6.3 x 5.8 6.3 x 5.8 8 x 10. 8 x 10. 70 85 240 290 374 454 8 x 6.2 6.3 x 7.7 125 151 6.3 x 5.8 8 x 10. 65 8 x 6.2 145 (143) 192 6.3 x 5.8 55 6.3 x 5.8 45 8 x 6.2 95 (94) 8 x 10. 140 (105) 238 289 6.3 x 5.8 8 x 6.2 8 x 10. 8 x 10. 31 46 96 117 140 232 4 0G 6.3 0J 10 1A 16 1C 25 1E 35 1V 50 1H 63 1J 100 2A 6.3 x 5.8 8 x 10. 8 x 10. 10 x 10. 10 x 10. 29 77 100 130 155 8 x 6.2 40 (35) 8 x 6.2 105 (94) 8 x 10. 8 x 10. 175 (132) 10 x 10. 195 (181) 10 x 10. 8 x 10. 214 10 x 10. 8 x 6.2 175 (173) 8 x 10. 215 (162) 10 x 10. 250 (232) 10 x 10. 265 (246) 10 x 10. 8 x 10. 270 10 x 10. 305 (284) 10 x 10. 324 (307) 10 x 10. 393 10 x 10. 330 10 x 10. 396 318 10 x 10. 10 x 10. 400 (372) 10 x 10. 10 x 10. 489 Case size D x L (mm) Rated ripple Size 6.3 x 5.8 is available for capacitors marked. " " Size 6.3 x 7.7 is available for capacitors marked. " " Size 8 x 10 is available for capacitors marked. " " In this case, 6 will be put at 12th digit of type numbering system. Rated Ripple (mArms) at 85C 120Hz Frequency coefficient of rated ripple current Cap.(F) Frequency 00 ~ 47V 100 ~ 1500 50 Hz 0.80 0.85 120 Hz 1.00 1.00 300 Hz 1.15 1.08 1 kHz 1.40 1.20 10 kHz~ 1.67 1.30 Taping specifications are given in page 24. Recommended land size, soldering by reflow are given in page 25, 26. Please select UG(p.75) series if high CV products are required. Please refer to page 3 for the minimum order quantity. CAT.8100V |
Price & Availability of UUR1C151MCL |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |